S275N Carbon and low alloy steel coil is under EN10025-3 standard equivalent to DIN:StE285,which with a minimum impact energy of 20J at temperatures not lower than -20 degree and the tensile strength of S275N is 370 to 510Mpa. S275N steel plate is one mainly of Fine-grain structural steels, normalised rolled steel.
EN10025-3S275N Carbon and low alloy steel coil is a kind of normalized or normalized rolled weldable fine grain structural steels. The delivery condition for S275N steel coil must be Normalized heat treatment or Normalized rolled way. S275N steel material No. Is 1.0490. EN10025-3 S275N steel coil have the good weldable and fine grain structural property. So, it can be used into the steel structural or welded vessel or pressure vessels.
EN10025-3S275N Carbon and low alloy steel coil Chemical composition(%)
C≤0.18 Si≤0.40 Mn:0.50-1.50 P≤0.030 S≤0.025 Cu≤0.55 Cr≤0.30 Ni≤0.30 V≤0.05 Nb≤0.05 Al≥0.02
S275N Carbon steel coil Mechanical property
Yield Strength ReH[N/mm2] transv.min.:275,265 TensileStrength Rm[N/mm2] transv:370-510 Fracture Elongation [%]transv. min.:24
Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J]: +20 KV 31J ,0 KV 27J, -10 KV 24J, -20 KV 20J
Delivery Condition: TMCP, Q& T, N, AR, CR, A, Q and N& T
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Steel products delivery guarantee:
One: According to the standard of container shipment.
Two: Steel packaging is moistureproof and abrasionproof.
Three: The ship is low safety risk, arrives quickly, and delivery in time.
Bebon International is dealing in a variety of Carbon and low ally steel coil. If you have any enquiry regarding to S275N steel looking for S275N steel coil supplier and want to get the EN10025-3S275N steel price,pls contact with us.